ZTE RACER

  • Креатор на темата Креатор на темата gice
  • Време на започнување Време на започнување
За ZTE-Racer не постои ни официјална 2.2 верзија а тек 2.3, тие шо се поставени како такви верзии се модификаци на 2.1 и се не многу функционални со голем број недостатоци и грешки

Никогаш нема да дочекате официјална, затоа пробајте.
 
Дали можи рачно да се подесат параметрите за GPRS интернет од ONE. Оти го одкодирав, ама на страницата на ONE нема за овој модел :(
 
Му го апдејтирав на комшијава телефонот на 2.3.3 добро е лета.
 
Му го апдејтирав на комшијава телефонот на 2.3.3 добро е лета.

Со каков ром од кај го симна и дали сите функции рабоотат ? И објасни ја малку постапката аку не ти е тешко :smir:
 
Постапката беше лесна во 2-3 чекори. Прво му правиш на телефонот recovery, па потоа го редиш упдајтот на сд картица и бираш апдејт од сд и тоа е тоа. (ова е МНОГУ скратена постапка :))

Колку што можев да заприметеам работеше се безпрекорно од вифи до гпс до апп2с.

--- надополнето ---

Мод долу во потпис верзија 7 final
 

не ми го наоѓа во маркетот никако, ја спуштив и апликацијата Android Macedonia и преку неа кога ќе ме поврзи во маркетот, појавува порака дека го нема :( дали го имаш да ми го пратиш, па да го префрлам на картичка и така да го инсталирам? :(
 
Мислам дека овие две видеа ќе ти поможат:


 
1. Брикнат телефон е телефон кој воопшто не реагира, не светка, не трепка, не покажува ништо на полнач, не го чита компјутер како ниту еден уред.
2. Брикнат телефон се сервисира со директна комуникација на процесорот и флеш чипот, најчесто преку LPT, Com или J-tag :)
 
1. Брикнат телефон е телефон кој воопшто не реагира, не светка, не трепка, не покажува ништо на полнач, не го чита компјутер како ниту еден уред.
2. Брикнат телефон се сервисира со директна комуникација на процесорот и флеш чипот, најчесто преку LPT, Com или J-tag :)

Во ред то така е, ама во случајот на зте за да се апдејтова мора да се инсталира рикавери, а вака е наједноставно, видеата се за рифлеш или анбрик, барем јас така успеав да клам рикавери пошо ниту една програма шо е за андроид ( ром менаџер, рикавери инсталер и сл ) не ми беше од голема функција.

ете и поописно :) http://goo.gl/8fSID http://goo.gl/l2TyX
 
Нови верзии за рејсерот! :)
жалам што е на англиски :toe:

Android 2.2 " http://android.modaco.com/content/zte-racer-roms-rom-customisation/337306/rom-android-2-2-for-racer-ready/ "

or

Android 2.3.4(cyanogenmod nightly) "http://videonovosti.info/media/2.3.4@4pdamod_27.05.2011.signed.zip "

* if u want to root ur then download the following files from here http://www.mediafire.com/?5mrn0fmghanzubh

Steps:
1. Export all your contacts to SD card. Open contacts----Select Menu----Select Import/Export----Select Export to SD card (if prompted to choose contacts from a list the select all by clicking on menu and then click done).
2. Note down the IMEI no. of your phone by removing the battery or by dialing *#06# on your phone.
3. Connect your phone to computer and open you sd card. Now create a new folder, name it as Upgradeand copy all the downloaded and extraced files including the rom file(zip file dowloaded from the above links ) to it.
4. Disconnect you phone from computer.
5. Open Filer on phone and open the folder Upgrade.
6. Install UniversalAndroot and open it.
7. Click on Root
8. Then it will tell u "woot ur phone is rooted "

NOW rooting is finished

* Now u hav to install recovery image so

Steps:
1. Go back to Upgrade and install recovery manager and open it.

2. Provide superuser rights by clicking on allow.
3. Click on recovery and further install recovery.
4. Select the image file recoverysu850.img on recovery install popup and then confirm by clicking on OK.

Now recovery installation is complete..!

* Rebooting into recovery mode:

Steps:
0 . Go back recovery manager and open it
1. Click on Reboot into recovery and confirm by clicking OK.
2. Phone will restart in recovery mode.
3. In this mode you can navigate in the menu list by using only volume increase/decrease keys and select a menu by pressing the power on/off button. Touch screen input is not operational in recovery mode.
4. Press these keys in sequence – volume decrease key—volume increase key--- volume decrease key. You’ll see a message on screen Back menu button enable (this enables your power button for selecting a menu option).
Note: If you press volume increase—volume decrease—volume increase then it will disable the power button (back menu button).

* Backup ur stock rom

Steps:
1. Go to backup and restore option by pressing volume increase key and select by pressing the power button.

2. Select backup by pressing the power button.This will backup your original phone configuration to sd card. The backup is stored in /clockworkmod/backup folder on SD card. This backup can be used to restore back to original firmware if you face any issue with the upgrade.
3. it will show backup is complete

Backup is complete...!!

* Installing new os

1. Once you see the backup complete option on your phone screen, navigate to wipe data/factory re option by using the volume keys and select it by pressing the power button.
2. Navigate to Yes – delete all u and select it by pressing power button.
3. When you see Data wipe complete on your screen, navigate to choose zip from sd card and select by pressing power button.
4. Navigate to upgrade folder and select by pressing power button.
5. Select zip file u want to install using power button.
6. Navigate to Yes-Install Android and press power button.
7. Wait while android is being installed.

8. you see the message Install from SD card complete

Os intallation complete..!!

* Now reboot the phone by selecting reboot option

First boot takes up a long so dont get scared....and now ur phone is upgraded

If u have ur phone in other launguage dont wory u can change ur launguage in the settings

** If at first start you find your phone is in locked mode, not to worry we can unlock it for free. **

Steps:
1. Visit the site –http://www.nextgenserver.com/calculator/ on your computer. Enter your IMEI (noted at the begining, then select the service as ZTE and select ZTE racer in Models. Then fill in the verification code as displayed on the screen and click on order.
The unlock code is generated, fill in this code on your phone and enjoy

Phone unlocked...!

Note: In case if you find that the new firmware is not working or you face something unexpected and want to go back to your original configuration. Just remove and reinsert your phone battery. Now press the volume decrease key and switch on your phone (don’t release the volume decrease button until phone displays android on screen). This will restart the phone in recovery mode and you’ll be able to restore the phone from the original backup. Same method can be used to install other ROMs available over internet.
 
успешно направив upgrade на 2.3.4, еве неколку screenshot's

snap20110705_234350.png
snap20110705_234247.png


snap20110706_000609.png
snap20110705_234242.png
 

Kajgana Shop

Back
На врв Bottom