Necrophilia
Find Prettys Womans from your city for night
- Член од
- 13 август 2006
- Мислења
- 7.633
- Поени од реакции
- 140
- Возраст
- 37
- Локација
- Usa
- Веб-сајт
- meettomy.site
BB5 Flashing
In the past, everyone used to say,
First rules of BB5 flashing : BB5 can not be downgraded, always check phone firmware version before flashing.
But now, with Dejan's trick, we can add second rules:
Almost all alive BB5 can be downgraded.
But make sure, your phone can enter local mode before flashing, and don't forget to thick/use downgrade option.
Also maybe you should consider again why you want to use this option, because highest firmware means bug repair in your phone.
And remember, if this failed, you have to ready to flash again with latest/highest version.
F-BUS cable :
Use only 7 pins cable for flashing with JAF box.
Make sure your phone can enter Local or Test Mode !!!
If not, maybe you need to check your cable, and then modified it, if not suitable with JAF specification.
1. NEVER EVER try putting 9v battery in F-BUS cable though your cable has this connector !!!
2. Resistance between BSI-GND must be 68k ohms, if less than it, maybe you will find "error sync the phone when make "CHK"
3. Resistance in BSI serial must be 5,1k(5k1) or 7,5k(7k5) ohms. Otherwise your phone can not enter Local / Test Mode.
4. Make sure VPP line from RJ45 connected to RX2 in phone.
Never use cable that connected VPP line in RJ45 with VPP in phone, you will get error something like "Error APE get id"
I don't give explanation about P-KEY and UFS Box, because newer BB5 phone with RAPIDO processor doesn't supported by UFS Box.
Example : N73
First step : make CHK – check phone hardware and cable connection :
JAF version 1.98.23
Detected PKEY: 90000000
Card life counter: 100.00%
P-key nokia module version 01.00
Detected JAF INTERFACE version: 01.AC, Driver version: 40000, Library version: 30107
JAF DCT4/BB5 LOADERS DIR: C:\Program Files\ODEON\JAF\Flash\
JAF DCT4/BB5 PRODUCT DIR: C:\Program Files\Nokia\Phoenix\Products\
JAF USB LOADERS DIR: C:\Program Files\ODEON\JAF\FlashUSB\
JAF DCT3/DCTL LOADERS DIR: C:\Program Files\ODEON\JAF\Flash3\
Changing mode...Done!
Booting phone...
APE Boot Data:
Asic ID: 17100708
Asic Mode ID: 00
Asic Public ID: CAFFF79C16636626A09B8A0285FBB8674C132695
HASH: 49A97E826B93BA20B7ED0B082475C00500000000
ROM ID: 1DFD66132C872FD4
CMT Boot Data:
Asic ID: 000000010000022600010006010C192101003000
Asic Mode ID: 00
Asic EM ID: 00000B21
Asic Public ID: 0F60000DA4940154AE88984A70E42FA1821B3ECA
HASH: BAF3A9C3DBFA8454937DB77F2B8852B100000000
ROM ID: 273F6D55DFAAF68F
CMT Boot File: C:\Program Files\ODEON\JAF\Flash\rap3gv3_2nd.fg
Loader version: 01.14.02 -> Revision: 0000
Patching CMT boot step1...
Patching CMT boot step2...
Patching CMT boot step3...
CMT Boot Ready
CMT Flash ID: 22E800EC
CMT Flash Data: 00000000000000000000000000000000
CMT Loader: C:\Program Files\ODEON\JAF\Flash\RAP3Gv3_algo.fg
Loader version: 01.14.02 -> Revision: 0000
Patching CMT loader step1...
Patching CMT loader step3...
CMT Loader Ready
APE Boot: C:\Program Files\ODEON\JAF\Flash\helen3_2nd.fg
Loader version: 01.21.00 -> Revision: 0000
Patching APE boot step1...
Patching APE boot step2...
Patching APE boot step3...
APE Boot Ready
APE Flash ID: 00A100EC
APE Flash Data: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Done!
Restarting phone...Done!
_____________________________________________________________________________________
5 pins cable / VPP line in rj45 connected to VPP line in phone:
Booting phone...
APE Boot Data:
Asic ID: 17100708
Asic Mode ID: 00
Asic Public ID: CAFFF79C16636626A09B8A0285FBB8674C132695
HASH: 49A97E826B93BA20B7ED0B082475C00500000000
ROM ID: 1DFD66132C872FD4
CMT Boot Data:
Asic ID: 000000010000022600010006010C192101003000
Asic Mode ID: 00
Asic EM ID: 00000B21
Asic Public ID: 0F60000DA4940154AE88984A70E42FA1821B3ECA
HASH: BAF3A9C3DBFA8454937DB77F2B8852B100000000
ROM ID: 273F6D55DFAAF68F
CMT Boot File: C:\Program Files\ODEON\JAF\Flash\rap3gv3_2nd.fg
Loader version: 01.14.02 -> Revision: 0000
Patching CMT boot step1...
Patching CMT boot step2...
Patching CMT boot step3...
CMT Boot Ready
CMT Flash ID: 22E800EC
CMT Flash Data: 00000000000000000000000000000000
CMT Loader: C:\Program Files\ODEON\JAF\Flash\RAP3Gv3_algo.fg
Loader version: 01.14.02 -> Revision: 0000
Patching CMT loader step1...
Patching CMT loader step3...
CMT Loader Ready
APE Boot: C:\Program Files\ODEON\JAF\Flash\helen3_2nd.fg
Loader version: 01.21.00 -> Revision: 0000
Patching APE boot step1...
Patching APE boot step2...
Patching APE boot step3...
APE Boot Ready
Error in cmd read id...
Error in ape get id...
______________________________________________________________________________________
Back to 7 pins cable, VPP line in RJ45 connected to RX2 in phone
Then info / INF :
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Switching to serial...
Powering the phone...
Reading...
MCU SW version: V 05wk47v38.1
19-01-07
RM-133
(c) Nokia.
HW version: 6012
PCI version:
RFIC version: _ 17191719
DSP version: __scarfe_05wk46v41
APE SW Core version: V 3.0704.1.0.1
19-01-2007
RM-133
APE Variant version: V 3.0704.1.0.1-14
19-01-2007
RM-133
Retu version: 15
Tahvo version: 21
APE HW version: 1
APE ADSP SW version: 256
Camera version: 1
APE BT version: HCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.
Production serial number: CNF555507
Product code: 0529833
Module code: 0202855
Basic production code: 0527006
Flash code:
Order number:
Product specific data:
Long production SN:
ATO:
Default SN type:
IMEI plain: 351851014795935
IMEI spare to net: 3A 15 58 01 41 97 95 03
IMEI SV to net: 33 15 58 01 41 97 95 23 F1
LOCK STATUS:
CONFIG KEY: 2440700000000000
Provider: AT&T;U.S.A. (3650)
Key Code count: 0, FBUS Code count: 0
Block 1:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 2:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 3:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 4:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 5:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 6:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 7:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Searching for saved ini...
Checking for file C:\Program Files\ODEON\JAF\JAF_RM-133.ini
Saved INI not found, loading INI list...
Setting local mode...
Reading product code...
Product Code: 0529833
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-133\N73_3.0705.1.0.31_western_C00_PRD_cc.fpsx
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-133\N73_rofx_3.0705.1.0.31_PRD.V11
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-133\N73_userarea_3.0705.1.0.31.U01
APE Variant file: NONE
Languages in ppm: English,Simpl Chinese
Done!
Change flash files with other product code :
Changing flashing settings...
Setting local mode...
Reading...
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-133\N73_3.0705.1.0.31_western_C00_PRD_cc.fpsx
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-133\N73_rofx_3.0705.1.0.31_PRD.V12
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-133\N73_userarea_3.0705.1.0.31.U01
APE Variant file: NONE
Languages in ppm: English,Trad Chinise,Indian