START HERE:
U will need:
1. an iPhone with AT&T(or O2) card which came with it!
(You CAN NOT buy some AT&T SIM and used for this method, it HAS TO BE one that come with iPhone! Because iPhone is "loaded" with data from SIM that came with it...and if data in "created SuperSim" is different u CAN NOT fool the iPhone to think it is connected on AT&T network! (thats what happens with this method)
2. SIM Reader/Writer (Infinity USB Unlimited, Dynamite Programer(I used this) ,etc...)
3. SilverCard ([media]http://img131.imageshack.us/my.php?i...cardtipfq1.jpg[/media])
4. Your SIM card (It must be a V1 ,U must be able to get Ki number)
5. Download :
SimEmu 6.01 - [media]http://simemu.gsmhosting.net/SIM_EMU_6.01_CFG_v2.1.zip[/media]
Woronscan 1.09 - [media]http://www.kinforce.com/down/kinforc...rsim/ws109.zip[/media]
1. ::Getting IMSI,ICCID & Ki number from your SIMs::
Step 1 - Your(V1)SIM
1. Put your carrier SIM card in programer
2. Run Woronscan
3. Click on "Tasks" tab then on "IMSI select" u will get a IMSI number, write it down.
4. Click on "Task" tab then on "ICC select" u will get a ICCID number, write it down.
5. Click on "Tasks" tab then on "Ki search", in pop-up window just click "Search", and wait,Ki extraction has began.(I was waiting for mine 40 min ) When u get it, write it down.
Step 2 - Getting IMSI from AT&T SIM card which came with an iPhone
1. Put your AT&T SIM card in programer
2. Click on "Tasks" then on "IMSI select" u will get a IMSI number, write it down.
3. Close Woronscan
4. Remove SIM from programer
Now U have all "data" to make SuperSim.
2. ::Making SuperSim::
1. Download & extract - [media]http://www.rapid_share.com/files/474..._iphone_u1.rar(Remove[/media] dash "-")
1.a Put your Silvercard in programer
2. Run Sim-Emu 6.01 Configurator v2.1
3. Click on Configure tab
4. Click "Read from disk" button
5. Browse to your downloaded Flash&EEPROM files, first double click on SIM_EMU_6.01_iphone_u1.HEX and then double click on SIM_EMU_6.01_iphone_u1_EP.HEX, now they are loaded,positions 0 and 9 are red colored,thats fine.
6. In position 0 , type in data which u got from your carrier SIM with Woronscan - IMSI,Ki & ICCID!
For ADN/SMS/FDN# type 161, 15, 4, for SMS Centre type in your carrier SMS center number. Type in
some numbers for PIN1 and PUK1, remember it.
7. Now select position "9", here type IMSI from AT&T SIM card ,and PIN1 ,PUK1 number same like in position "0" ,NOTHING ELSE!
8. In "Config mode" tick "Files" circle button.
9. Click on "Write to disk" button,u'll be asked to save new created SuperSim Flash&Eeprom files,Save it!
10. Write those NEW created Flash&Eeprom files on Silvercard with your programer software!
11. How to cut big card to SIM - [media]http://www.mobileshop.org/usertech/simcutting.htm[/media]
12. Put your SuperSIM in iPhone and connect it with USB to PC
3. ::Making your iPhone work with SuperSim::
1. Jailbreak & Activate your iPhone (search the forum for "How To" for your iPhone version)
1.a) If after Jailbreak and Activation your iPhone still dont accept SuperSim proceed with 2.
2. Download - [media]http://rapid_share.com/files/74205465/SuperSim.rar[/media] ,unrar folder from inside to Desktop
3. Go to - [media]https://ookoo.org/iphone/iasign.php[/media] ,under Activator v0.2 type in DEVICE ID, IMEI ,ICCID. Click "Generate"
If u're on WIN click on "download a custom activator v0.2" to download *.exe , now move it to SuperSim folder.
If u're on MAC click on download your generated activation record to download *.plist file TO DESKTOP. (after download RENAME IT TO a.plist !!!!!!)
:: Activation ::
WINDOWS
While your iPhone is still connected to PC double click iphoneinterface.exe in SuperSim folder,now type one command at the time:
cd /System/Library/Lockdown/
putfile /System/Library/Lockdown/iPhoneActivation.pem
exit
Now double click that long digit exe file u downloaded in step 3. to activate your iPhone with SuperSim!
MAC
1.)Copy iPhoneActivation.pem from SuperSim folder to /System/Library/Lockdown/ ,with your favorite tool
2.) Download the following file to your Mac.
[media]http://anderson-technologies.com/wp-...iphonetool.zip[/media]
3.) Extract it to a directory on your desktop named iPhoneTool , AND COPY YOUR DOWNLOADED a.plist file OVER that one already inside!
4.) Open the program “Terminal” location in HardDrive/Applications/Utilities
5.) Type the following command into the flashing cursor:
cd ~/Desktop/iPhoneTool
6.) Now make sure your iPhone is connected and you quit iTunes
7.) To activate your iPhone type the following command into the flashing cursor
(note that there are two dashes before activate):
./tool --activate a.plist
Note: If U are using 1.1.2 U NEED iWorld application to make SMS and phone work, u can find it in Installer-->Tweaks(1.1.2). Install it, run it, select your country, reboot iPhone if it doesnt automaticly.
EDIT: I changed tutorial so that u use ICCID from your carrier SIM. (Thanx ozbimmer)
EDIT: Added link to new SIM_EMU_6.01_iPhone_u1(Thanx Vladimir_CDI)
EDIT: Removed step to disable PIN in Woronscan,added info how to disable PIN in iPhone
EDIT: Refreshed activation
EDIT: Update regarding AT&T(or O2) SIM card
EDIT: Added Donation Option
линк: [media]http://www.hackint0sh.org/forum/showthread.php?t=2215[/media]
U will need:
1. an iPhone with AT&T(or O2) card which came with it!
(You CAN NOT buy some AT&T SIM and used for this method, it HAS TO BE one that come with iPhone! Because iPhone is "loaded" with data from SIM that came with it...and if data in "created SuperSim" is different u CAN NOT fool the iPhone to think it is connected on AT&T network! (thats what happens with this method)
2. SIM Reader/Writer (Infinity USB Unlimited, Dynamite Programer(I used this) ,etc...)
3. SilverCard ([media]http://img131.imageshack.us/my.php?i...cardtipfq1.jpg[/media])
4. Your SIM card (It must be a V1 ,U must be able to get Ki number)
5. Download :
SimEmu 6.01 - [media]http://simemu.gsmhosting.net/SIM_EMU_6.01_CFG_v2.1.zip[/media]
Woronscan 1.09 - [media]http://www.kinforce.com/down/kinforc...rsim/ws109.zip[/media]
1. ::Getting IMSI,ICCID & Ki number from your SIMs::
Step 1 - Your(V1)SIM
1. Put your carrier SIM card in programer
2. Run Woronscan
3. Click on "Tasks" tab then on "IMSI select" u will get a IMSI number, write it down.
4. Click on "Task" tab then on "ICC select" u will get a ICCID number, write it down.
5. Click on "Tasks" tab then on "Ki search", in pop-up window just click "Search", and wait,Ki extraction has began.(I was waiting for mine 40 min ) When u get it, write it down.
Step 2 - Getting IMSI from AT&T SIM card which came with an iPhone
1. Put your AT&T SIM card in programer
2. Click on "Tasks" then on "IMSI select" u will get a IMSI number, write it down.
3. Close Woronscan
4. Remove SIM from programer
Now U have all "data" to make SuperSim.
2. ::Making SuperSim::
1. Download & extract - [media]http://www.rapid_share.com/files/474..._iphone_u1.rar(Remove[/media] dash "-")
1.a Put your Silvercard in programer
2. Run Sim-Emu 6.01 Configurator v2.1
3. Click on Configure tab
4. Click "Read from disk" button
5. Browse to your downloaded Flash&EEPROM files, first double click on SIM_EMU_6.01_iphone_u1.HEX and then double click on SIM_EMU_6.01_iphone_u1_EP.HEX, now they are loaded,positions 0 and 9 are red colored,thats fine.
6. In position 0 , type in data which u got from your carrier SIM with Woronscan - IMSI,Ki & ICCID!
For ADN/SMS/FDN# type 161, 15, 4, for SMS Centre type in your carrier SMS center number. Type in
some numbers for PIN1 and PUK1, remember it.
7. Now select position "9", here type IMSI from AT&T SIM card ,and PIN1 ,PUK1 number same like in position "0" ,NOTHING ELSE!
8. In "Config mode" tick "Files" circle button.
9. Click on "Write to disk" button,u'll be asked to save new created SuperSim Flash&Eeprom files,Save it!
10. Write those NEW created Flash&Eeprom files on Silvercard with your programer software!
11. How to cut big card to SIM - [media]http://www.mobileshop.org/usertech/simcutting.htm[/media]
12. Put your SuperSIM in iPhone and connect it with USB to PC
3. ::Making your iPhone work with SuperSim::
1. Jailbreak & Activate your iPhone (search the forum for "How To" for your iPhone version)
1.a) If after Jailbreak and Activation your iPhone still dont accept SuperSim proceed with 2.
2. Download - [media]http://rapid_share.com/files/74205465/SuperSim.rar[/media] ,unrar folder from inside to Desktop
3. Go to - [media]https://ookoo.org/iphone/iasign.php[/media] ,under Activator v0.2 type in DEVICE ID, IMEI ,ICCID. Click "Generate"
If u're on WIN click on "download a custom activator v0.2" to download *.exe , now move it to SuperSim folder.
If u're on MAC click on download your generated activation record to download *.plist file TO DESKTOP. (after download RENAME IT TO a.plist !!!!!!)
:: Activation ::
WINDOWS
While your iPhone is still connected to PC double click iphoneinterface.exe in SuperSim folder,now type one command at the time:
cd /System/Library/Lockdown/
putfile /System/Library/Lockdown/iPhoneActivation.pem
exit
Now double click that long digit exe file u downloaded in step 3. to activate your iPhone with SuperSim!
MAC
1.)Copy iPhoneActivation.pem from SuperSim folder to /System/Library/Lockdown/ ,with your favorite tool
2.) Download the following file to your Mac.
[media]http://anderson-technologies.com/wp-...iphonetool.zip[/media]
3.) Extract it to a directory on your desktop named iPhoneTool , AND COPY YOUR DOWNLOADED a.plist file OVER that one already inside!
4.) Open the program “Terminal” location in HardDrive/Applications/Utilities
5.) Type the following command into the flashing cursor:
cd ~/Desktop/iPhoneTool
6.) Now make sure your iPhone is connected and you quit iTunes
7.) To activate your iPhone type the following command into the flashing cursor
(note that there are two dashes before activate):
./tool --activate a.plist
Note: If U are using 1.1.2 U NEED iWorld application to make SMS and phone work, u can find it in Installer-->Tweaks(1.1.2). Install it, run it, select your country, reboot iPhone if it doesnt automaticly.
EDIT: I changed tutorial so that u use ICCID from your carrier SIM. (Thanx ozbimmer)
EDIT: Added link to new SIM_EMU_6.01_iPhone_u1(Thanx Vladimir_CDI)
EDIT: Removed step to disable PIN in Woronscan,added info how to disable PIN in iPhone
EDIT: Refreshed activation
EDIT: Update regarding AT&T(or O2) SIM card
EDIT: Added Donation Option
линк: [media]http://www.hackint0sh.org/forum/showthread.php?t=2215[/media]
